Atlas AC Repair, LLC

Make-ready HVAC Inspection Details

HVAC systems we inspect

Make-ready Inspection

Heat Pump System Inspection

Basic $49

  1. Check Voltages
  2. Check Freon Pressures
  3. Inspect condenser coils and remove any debris
  4. Inspect reversing valve for proper operation to ensure heating and cooling is working
  5. Inspect whip and disconnect for proper operations and fuse size
  6. Record make/model/age
  1. Inspect platform to confirm air handler is level
  2. Inspect Supply and Return plenum from proper seal
  3. Inspect Blower Wheel and clean if necessary
  4. Inspect filter and record filter size
  5. Inspect Evaporator coil to ensure it is clear and clean
  6. Confirm air handler has safety switches
  7. Inspect and blow out the drain line
  8. Check volts and amps in the air handler
  9. Inspect breaker box to make sure correct breaker size are installed
  10. Record make and model
  11. Inspect duct work to ensure there are no leaks, and ductwork is run properly
  12. Provide full report and pictures

Premium with tune-up $225

  1. Check Voltages
  2. Check Freon Pressures
  3. Inspect condenser coils and remove any debris
  4. Inspect reversing valve for proper operation to ensure heating and cooling is working
  5. Inspect whip and disconnect for proper operations and proper fuse size
  6. Record make/model/age
  7. Rinse the condenser coils
  1. Inspect platform to confirm air handler is level
  2. Inspect Supply and Return plenum from proper seal
  3. Inspect Blower wheel and make sure it is clean
  4. Record filter size
  5. Confirm air handler has safety switches, if not install two
  6. Inspect and blow out the drain line
  7. Check volts and amps in the air handler
  8. Inspect breaker box to make sure correct breaker size are installed
  9. Record make and model
  10. Inspect duct work to ensure there are no leaks, and ductwork is run properly
  11. Provide full report and pictures
  12. Clean Evap coil in place, foam spray/wash
  13. Duct Disinfectant
  14. Install new capacitor
  15. Install new contactor
  16. Replace filter
  17. Leave 3 additional filters at home
Make-ready Inspection

Furnace Inspection

Basic $49

  1. Check Voltages
  2. Check freon Pressure
  3. Inspect condenser coils and remove any debris
  4. Inspect whip and disconnect box for proper operation and fuse size
  5. Record make/model/age
  1. Inspect Platform to confirm system is level
  2. Inspect Supply and Return Plenum for proper seal
  3. Inspect filter and record filter size
  4. Inspect Evaporator coil to ensure it is clear and clean
  5. Inspect Blower Wheel and clean if necessary
  6. Check Volts and Amps
  7. Confirm system has safety switches
  8. Inspect flue pipe for proper seal
  9. Inspect fresh air screen
  10. Confirm gas in on and furnace is operating correctly
  11. Inspect gas valve for proper operations
  12. Inspect duct work to make sure there is no leaks, and duct work is run properly
  13. Record filter size
  14. Provide full report and pictures

Premium with tune-up $225

  1. Check Voltages
  2. Check freon Pressure
  3. Inspect condenser coils and remove any debris
  4. Inspect whip and disconnect box for proper operation and fuse size
  5. Record make/model/age
  6. Rinse the condenser coils
  1. Inspect Platform to confirm system is level
  2. Inspect Supply and Return Plenum for proper seal
  3. Record filter size
  4. Inspect Evaporator coil to ensure it is clear and clean
  5. Inspect Blower Wheel and clean if necessary
  6. Check Volts and Amps
  7. Confirm system has safety switches
  8. Inspect flue pipe for proper seal
  9. Inspect fresh air screen
  10. Confirm gas in on and furnace is operating correctly
  11. Inspect gas valve for proper operations
  12. Inspect duct work to make sure there is no leaks, and duct work is run properly
  13. Provide full report and pictures
  14. Clean Evap coil in place, foam spray/wash
  15. Duct Disinfectant
  16. Install new capacitor
  17. Install new contactor
  18. Replace filter
  19. Leave 3 additional filters at home
Make-ready Inspection

Straight Cool/Electric System Inspection

Basic $49

  1. Check Voltages
  2. Check Freon Pressures
  3. Inspect condenser coils and remove any debris
  4. Inspect whip and Disconnect for proper operations and fuse size
  5. Record make/model/age
  1. Inspect Platform to ensure air handler is level
  2. Inspect Supply and return plenum for proper seal
  3. Inspect filter and record filter size
  4. Inspect Evaporator coil to ensure it is clear and clean
  5. Inspect blower wheel and clean if necessary
  6. Confirm Air Handler has Safety Switches
  7. Inspect and blow out drain line
  8. Check volts and amps
  9. Record make/model/age
  10. Inspect duct work to make sure there is no leaks, and duct work is run properly
  11. Provide full report and pictures

Premium with tune-up $225

  1. Check Voltages
  2. Check Freon Pressures
  3. Inspect condenser coils and remove any debris
  4. Inspect whip and Disconnect for proper operations and fuse size
  5. Record make/model/age
  1. Inspect Platform to ensure air handler is level
  2. Inspect Supply and return plenum for proper seal
  3. Record filter size
  4. Inspect Evaporator coil to ensure it is clear and clean
  5. Inspect blower wheel and clean if necessary
  6. Confirm Air Handler has Safety Switches
  7. Inspect and blow out drain line
  8. Check volts and amps
  9. Record make/model/age
  10. Inspect duct work to make sure there is no leaks, and duct work is run properly
  11. Provide full report with pictures
  12. Clean Evap coil in place, foam spray/wash
  13. Duct Disinfectant
  14. Install new capacitor
  15. Install new contactor
  16. Replace filter
  17. Leave 3 additional filters at home