Atlas AC Repair, LLC

Austin – Dallas – Fort Worth – Houston – San Antonio

2 Ton HVAC Unit Cost (by a real HVAC Company)

The average 2-Ton HVAC unit cost between $6,733 to $7,337.

2-Ton HVAC Cost Guide

Complete 2-Ton HVAC replacement cost guide
  • 2-Ton Outdoor HVAC Unit Cost – $3,467.00
  • 2-Ton Indoor Furnace Cost – $3,988.00
  • 2-Ton HVAC System Cost – $6,951.00

Request Free AC Replacement Quote

Cost of a 2-Ton HVAC System Breakout

The cost is one of the most shocking things for many homeowners looking to replace their HVAC system. The price of a new 2-ton system has gone up quite a bit over the last few years, contributing some to the sticker shock, but you might be asking, what all goings into a new install? The table below reveals some of the significant components that go into a changout. By the time we add everything that goes into a changeout, we are left with the cost of a 2-ton HVAC system of around $6,951. Keep in mind this price is based on a basic 14.3 SEER2 2-ton system with no bells and whistles.

2 Ton Gas HVAC SystemEquipmentLaborTotal
Remove Indoor Furnace & Outdoor AC Unit-$400.00$400.00
Set New Indoor Furnace & Outdoor AC Unit$3,754.78$600.00$4,354.78
Reconnect Plenum, Line Set, & Drain$241.73$500.00$741.73
Install New, Filter Drier, Safety Switch, Locking Cap, & Thermostat$535.98$400.00$935.98
Calibrate & Commission System$221.81$300.00$521.81
Total$4,754.30$2,200.00$6,954.30

What needs to be included in new HVAC installation

  • Pump Down The Unit
  • Remove Indoor Furnace & Outdoor AC Unit
  • Acid Flushing Line Set
  • Replace Disconnect & Whip (If Needed)
  • Install Max Circuit Protection Fuses (If Needed)
  • Install New Indoor Furnace & Outdoor AC Unit
  • Reconnect And Seal Plenum
  • Reconnect Line Set
  • Reconnect Drain Line
  • Install New Filter Drier
  • Install Safety Switch
  • Install Locking Caps
  • Install New Thermostat
  • Calibrate The System
  • Commission The System
  • Complete City Permit & City Inspection (If Needed)
  • Includes 10-year parts warranty & 2 year labor warranty
Carrier comfort AC unit pricing

Note: The installation process is critical to the long-term health and performance of the HVAC. If one of these steps is missed, it can significantly reduce the system’s useful life.

2-Ton HVAC Unit Cost By System Type

The cost to replace a 2-ton HVAC system can vary based on the type of system you currently have. Gas systems usually have higher upfront costs due to installation complexity but offer a more superior method of heating. Electric systems have lower initial costs and may lack operational efficiency, driving up your electric bill. Heat Pumps are an excellent option for efficiency because they use freon to keep your home both cool and warm. Homeowners should weigh these factors to make an informed choice, balancing upfront expenses with potential savings on operational costs over time. Based on your system type, a 2-ton HVAC unit cost will range between $6,733 to $7,337.

TypeCost
Electric Heat$6,733.51
Heat Pump$7,133.03
Gas Heat$7,337.98
Duel Fuel$8,554.21
Side Discharge$10,840.97

Gas HVAC System

Gas HVACs are good for heating, especially in cold places, and they’re efficient and not too expensive to run. They warm up your place fast and keep it cozy. But there are downsides. The fuel they use might get more expensive. Installing them can be a bit tricky and can cost a lot, and you need to keep them in good shape for safety. So, while gas systems work well and have a long, useful life, you should think about the long-term costs, too. The average 2-ton HVAC unit price is going to come in around $7,337.

Build Your Own Online AC Quote

Carrier AC unit

Heat Pump HVAC System

Heat pump HVACs are energy-efficient. They work as both heaters and air conditioners, giving comfort all year. They’re good for the environment as they don’t use burning fuels, reducing carbon footprints. Installing them isn’t too expensive, and they are one of the most efficient operations. However, they might struggle in super cold places and need extra heating. Regular maintenance is a must to keep them working well. In short, heat pumps are flexible and eco-friendly, but it’s important to consider if they can handle the cold weather in your area. When looking at the average cost to replace 2-ton HVAC, it’s going to run around $7,133 for a complete changeout.

Electric HVAC System

An electric HVAC is one of the market’s most economical air conditioning and heating systems. However, they use the most electricity to heat a home. That is why most homeowners opt for a different unit if they are planning on living in their home for a while. Another application that electric systems are commonly used for is rental properties. That is because they are cheap, and it doesn’t make sense to install an expensive unit if a tenant isn’t going to take care of the unit properly. The cost for a 2-ton HVAC unit is going to be around $6,733 on average.

Duel Fuel HVAC System

Many homeowners are unaware of what a dual-fuel system is. In short, it is a hybrid between a gas furnace and an outdoor heat pump unit. What’s different about these units is the way they heat. The primary heating source comes from the heat pump, but when it can no longer keep up, the gas furnace will kick on as emergency heat. The benefit of this setup is since the heat pump is the primary heating source, it heats very efficiently while having your gas furnace as a backup. However, the downside is it’s going to cost more than other HVACs on this list, and some companies don’t have trained installers for the changeout.

Side Discharge HVAC System

Side discharge central HVACs have recently appeared on the scene over the last few years. There are two main factors that contribute to their popularity. The first being the footprint. The outdoor unit is much smaller. So, if you have an outdoor unit in the side yard walkway, you can use a side discharge unit to save some space. The next big advantage is they are variable speed. This means the cooling and heating capacity operates in a broad range, anywhere between 25% to 100% cooling and heating capacity. This helps to make a side discharge system more energy efficient along with better heating and cooling your home.

Carrier Crossover AC unit pricing

2-Ton HVAC System Cost Vs Quality

Investing in a higher quality 2-ton HVAC inevitably comes with a higher upfront cost. While a high-quality 2-ton HVAC system cost may be more substantial initially, the efficiency, durability, and enhanced performance benefits are significant. For example, a variable-speed incorporates advanced technologies, superior materials, and improved design, ensuring better temperature control and energy savings in the long run. Despite the initial expense, the increased efficiency can lead to lower operational costs, making the higher-quality 2-ton unit a better choice for those prioritizing long-term value and optimal home comfort.

StagesCost
Single Stage SEER2 HVAC System$6,733.51
Two Stage HVAC System$9,696.84
Variable Speed HVAC System$12,443.76

Single-Stage

A single-stage system, though affordable, has limited temperature control. It operates at full blast or turns off completely, causing temperature swings. This on-off pattern can make it hard to keep a steady and comfy indoor environment. Unlike better units that adjust to subtle temperature changes, single-stage ones lack that kind of precision. So, they might struggle to provide the ideal control needed for consistent comfort and energy efficiency. If you’re aiming for a system that responds better to your comfort needs and saves energy, it might be worth considering more advanced options over a basic single-stage HVAC.

Build Your Own Online AC Quote

Two-Stage

A two-stage HVAC, working at about 70% for regular needs and 100% for extreme conditions, provides better temperature control than a basic single-stage unit. A two-stage can handle milder weather with lower power and ramps up when it gets really hot or cold. This helps prevent sudden changes in temperature, making your indoor environment more comfortable and consistent. Unlike simpler single-stage, two-stage units are good at adjusting to different conditions, which means they’re more energy-efficient and can save you money in the long run. So, a two-stage is an intelligent choice if you want a system that keeps you comfortable and saves energy.

Variable-Speed

A variable-speed HVAC delivers precise temperature control, significantly improving traditional systems. Unlike single-stage units, a variable-speed can adjust its operating speed to meet your home’s exact heating or cooling demands. This results in a more stable and comfortable indoor environment. A variable-speed flexibility enhances comfort and contributes to energy efficiency and cost savings. By avoiding constant cycling between full power and off, these systems maintain a consistent temperature, reduce energy consumption, and extend the lifespan of components. Although the upfront cost of a variable-speed is higher, opting for a variable-speed HVAC provides a comprehensive solution for homeowners seeking optimal climate control, efficiency, and long-term performance.
Carrier infinity HVAC replacement cost around $15,000

Two-Ton HVAC per Home SQFT

The square footage of a home significantly influences the size of the HVAC unit required for efficient heating and cooling. Larger homes generally demand more powerful units to maintain comfortable temperatures throughout. The size of the unit is measured in tons, with one ton equivalent to the amount of heat needed to melt one ton (2000 pounds) of ice in a 24-hour period. As square footage increases, so does the demand for the system. When considering the installation of a new HVAC, factors such as insulation, local climate, and the home’s layout should be considered alongside square footage to determine the appropriate size. This careful evaluation prevents inefficiencies and unnecessary costs, including the consideration of the two-ton HVAC unit cost.

Homes Built InSouthern US HomesNorthern US Homes
2024 - 20141300 Sqft1600 Sqft
2013 - 20001150 Sqft1350 Sqft
1999 - 19801000 Sqft1200 Sqft
1960 - 1979800 Sqft1000 Sqft

Other sizing factors

Just looking at square footage when sizing an HVAC isn’t enough. It ignores important things like insulation, foundation type, and ceiling height. For example, a poorly insulated home needs a bigger unit to make up for heat loss. Also, houses with different ceiling heights or foundations might have uneven temperatures. Relying only on square footage doesn’t consider these differences. It’s like trying to fit everyone into the same-sized shoes. You need to look at insulation, construction, and local weather conditions to get the right HVAC. This way, you avoid spending too much on a system that might not suit your home’s specific needs.

Build Your Own Online AC Quote

Heat Load Calculation

Knowing the heat load of a room is crucial for getting the right-sized HVAC. Heat load is all about figuring out how much heat your space needs to stay comfortable. It considers things like insulation, windows, doors, appliances, and how many people are there. Unlike just looking at square footage, understanding the heat load gives you the full picture of what your space really needs. This way, you can avoid getting an HVAC that’s too big or too small. If it’s too big, it might waste energy and cost more. If it’s too small, it might struggle to keep your space comfortable. So, knowing the heat load helps you pick the right HVAC, saving energy and keeping you comfortable.

HVAC Innovations

In recent years, HVAC technology has advanced significantly, transforming the way we approach heating and cooling in homes. Innovations such as smart thermostats, energy-efficient designs, and improved ventilation systems contribute to enhanced comfort and sustainability. These developments not only cater to different preferences but also address environmental concerns. Additionally, advancements in manufacturing and materials have influenced pricing structures, lowering the 2-ton HVAC system price. Homeowners now have access to options that provide better performance at reasonable prices.

  • Increased SEER Ratings
  • Quieter Systems
  • Better Comfort
  • More Options and Add Ons
Inside a carrier AC unit

Better Energy Efficiency

Recent HVAC innovations have led to a significant increase in Seer ratings, revolutionizing the efficiency of air conditioning systems. The implementation of advanced technologies, such as variable-speed compressors and smart thermostats, has contributed to higher Seer values, ensuring optimal energy utilization. Homeowners seeking to enhance their HVAC may find that the cost of a 2-ton unit varies based on these innovations. While initial investments might be higher, the long-term energy savings and improved performance often justify the expense. Also, the focus on eco-friendly refrigerants and sustainable design in modern HVAC solutions aligns with the growing demand for environmentally conscious home appliances. As the industry continues to prioritize innovation, consumers can expect further improvements in Seer ratings, offering both enhanced comfort and energy efficiency in their homes.

Quieter HVAC

HVAC innovations have increased efficiency and prioritized quieter operations, addressing a common concern among homeowners. Modern HVAC technologies include advanced sound-dampening materials and noise-reducing components, which contribute to a more tranquil indoor environment. Homeowners seeking peace and quiet may find investing in a quiet 2-ton HVAC worth considering. These systems utilize innovative features to minimize noise levels, ensuring a more pleasant and undisturbed living space. The demand for quieter HVAC has prompted manufacturers to explore innovative designs and materials, fostering a market where a quiet 2-ton HVAC can cost between $10,904 and $13,811. As the industry continues to evolve, the focus on providing efficient and quieter HVAC options underscores a commitment to enhancing the overall home.

Better Home Comfort

HVAC innovations have started a new era of superior comfort, redefining the expectations of homeowners. With advancements such as variable-speed technology and smart climate control, modern HVAC offers precise temperature regulation, ensuring optimal comfort levels throughout the home. The integration of these advancements enhances not only efficiency but the overall comfort experience. Homeowners exploring options may find that a 2-ton price range for a better system will vary depending on the features aimed at maximizing comfort. These units often come equipped with advanced air filtration, humidity control, and zoning capabilities, allowing for personalized climate management. Investing in a higher-priced 2-ton HVAC can provide a noticeable improvement in overall comfort, offering a more tailored and enjoyable indoor environment for residents. As technology continues to progress, the pursuit of enhanced comfort remains a primary focus when developing new  technology.

Customizable

Because of new HVAC Innovations, 2-ton HVAC units have more options than ever before, providing homeowners with a diverse range of features to customize their indoor climate. From advanced air purification systems and smart thermostats to zoned heating and cooling, the array of choices allows individuals to tailor their HVAC solutions to meet specific preferences and needs. The availability of these add-ons not only enhances comfort but also contributes to improved energy efficiency and indoor air quality. As homeowners increasingly prioritize personalized home environments, the market’s response has been to continue developing innovative options for your 2-ton HVAC, making the decision to invest in add-ons a path to a more customized and sophisticated climate control experience.

FAQ

1. How many square feet will a 2 ton HVAC cool?

A 2-ton HVAC unit typically cools around 800 to 1,200 square feet efficiently. This cooling capacity is influenced by factors like insulation, climate, and ceiling height. Depending on HVAC specifications and upgrades, some may be more efficient at cooling this square footage than others.  2-ton units strike a balance between energy efficiency and effective cooling, making it a reliable choice for maintaining a comfortable environment within its specified range.

2. How much should a 2 ton AC unit cost?

The cost of a 2-ton AC unit varies, ranging from $6,300 to $7,000 for a basic unit. While upfront expenses may differ depending on add-ons and system ratings, investing in a reliable and energy-efficient unit can lead to long-term savings on energy bills. It’s essential to consult with our professionals to determine the best fit for your specific needs. Finding the right balance between affordability and performance ensures a cool and comfortable space without compromising quality.

3. What does 2-ton mean in HVAC?

In HVAC terms, “2-ton” refers to the unit’s cooling capacity, not its weight. One ton is equivalent to 12,000 BTUs of cooling per hour so a 2-ton system can cool 24,000 BTUs. 2-tons of heating and cooling can properly condition a small space like an apartment or condo. This measurement indicates the amount of heat the air conditioner can remove in an hour. It’s crucial to select the right unit size based on the square footage and climate. Understanding this helps ensure optimal efficiency, providing effective and comfortable cooling tailored to specific needs. 

4. How long should a 2-ton AC unit last?

A well-maintained 2-ton AC unit typically has a lifespan of 15 – 20 years. Regular maintenance, timely repairs, and attention to its operational efficiency contribute to its longevity and can further increase the lifespan of the unit. Factors such as usage frequency, climate, and overall care play crucial roles. Investing in quality equipment and scheduling routine inspections can extend the lifespan, ensuring added years of reliable cooling performance. With proper care, a 2-ton AC unit becomes a lasting and efficient solution for maintaining indoor comfort over the long haul.

Get a Free Quote... No Salesman

Atlas AC Service Area

Atlas AC Repair service area in San Antonio and Austin
Atlas AC Repair service area in Dallas and Fortworth
Atlas AC Repair service area in Houston

How to get a fair price on an HVAC install?

12 Things Every Homeowner Should Know Before Buying New HVAC

Download the Atlas AC Buyers Guide before you buy a new AC.

The HVAC industry still operates as the wild west, and many homeowners are left to fend for themselves. Atlas AC created the Buyers Guide to prevent homeowners from being exploited by untrustworthy HVAC companies.

Use this guide to help you select the best HVAC Company for your next HVAC Replacement.